Camprofile or "Grooved" Gaskets have proven themselves in all industrial applications. Camprofile gaskets are found in industrial power plants and in the primary circuits in nuclear installations. Used either between flanges or in heat exchanger units in nuclear applications. The Petrochemical and Chemical industries benefit too, as the gaskets are used in applications where high pressures and temperatures are maintained and consequently high bolt loads need to be controlled.
For flange protection the Camprofile gaskets are normally used in conjunction with a covering layer of either PTFE, Graphite etc, and provided that the layer thickness is correct in application the flange will be completely protected from the grooved profile of the gasket.
Advantages
Camprofile Gaskets-for flanged joints
Example A
without centering ring
Example B with
centering ring
Seating stress at 70°F:
Metals Available:
Note: Metal selection is usually consistent with piping system.
Sealing Elements Available:
Mercer Gasket & Shim
Interstate Industrial Park & 110 Benigno Boulevard
Bellmawr, NJ 08031
ISO 9001:2000 certified
On call 24 hours!
(800) 210-5000
Fax: (856) 931-6400
 |
 |
 |
 |
 |
 |